The user is then prompted for the New Name for Output Grid (Figure 3-9).
This is the name for the resulting cross-section grid. Always enter a new name.
HyPAS will not allow the user to overwrite another grid. After entering the output
grid name, click OK.
Figure 3-9. Menu for output grid file name
HyPAS then prompts with the Cross-Section Plot Parameters menu (Figure 3-
10). This menu prompts for the Depth Axis (Y) limit, increment, and title and the
Distance Axis (X) increment and title. These parameters affect the appearance of
the resulting cross section. The depth axis limit is the maximum depth shown on
the cross section. The increment is the amount between ticks on the axis. The title
is the title to be placed on the axis. The depth axis limit must be equal or greater
than the maximum depth of the data and evenly divisible by the axis increment. If
the input does not satisfy these two conditions, the user will be prompted to re-enter
those two parameters. The maximum depth of the data is the default value for the
Chapter 3 Cross-Section Analysis